The Dräger X-am® 2800 (Part Number: 3703918) is a robust and compact multi-gas detector engineered for reliable personal air monitoring in industrial environments. Capable of detecting up to four gases simultaneously, it includes an Ex (CatEx SR), oxygen (O₂), carbon monoxide (CO), and hydrogen sulfide (H₂S) sensor setup. Designed with safety and efficiency in mind, this model includes a shock-resistant CatEx sensor, Bluetooth® 5.0 connectivity, and integration with the Dräger Gas Detection Connect platform. The configuration includes a rechargeable NiMH T4 battery, while charging equipment must be ordered separately.

The unit ships with factory default settings, including standard alarm thresholds, %LEL as the unit for the CatEx sensor (calibrated to methane), and an O₂ measuring range of 0–25 Vol.-%.

Key Features

Simultaneous Multi-Gas Monitoring: Detects up to four gases with high accuracy (Ex, O₂, CO, H₂S)
Shock-Resistant CatEx SR Sensor: Calibrated to methane, with high resistance to mechanical impacts and rapid response time
Bluetooth® 5.0 Connectivity: Enables real-time data transfer and remote monitoring via Dräger Gas Detection Connect
Optimized Data Compression: Stores over 1,000 hours of logs using a space-saving compression method
Clear Display and Simple Interface: Large, glove-friendly buttons and high-resolution matrix display
Triple Alarm System: Visual (red/yellow LEDs), audible (>90 dB at 30 cm), and vibration alarms
Highly Durable Design: IP68 rating and >2 m drop-tested, built for harsh environments
Ex-Zone 0 Approved: Suitable for use in explosive atmospheres
Ready in Under 60 Seconds: Rapid startup ensures minimal downtime in safety-critical settings

Intended Use

The X-am® 2800 is ideal for industrial professionals working in oil & gas, petrochemical plants, wastewater treatment, or confined space entry. This detector enhances operational safety by monitoring toxic, flammable, and oxygen-deficient environments in real-time.

Product Specifications

Part Number: 3703918
Dimensions: 130 × 48 × 44 mm
Weight: 220–250 g (depending on configuration)
Battery Type: NiMH T4 rechargeable (included)
***Charger: Not included (compatible charger: 3703889 or 8320333)***
Operating Time: Up to 12 h (with CatEx and Bluetooth active), ~100 h (without Ex sensor)
Charging Time: < 4 hours
Ingress Protection: IP68
Data Storage: > 1,000 hours (1-minute intervals)
Ready Time: < 60 seconds
Sensor Configuration: Ex (CatEx SR), O₂, CO, H₂S

Sensor Ranges:
Ex: 0–100 % LEL (1% resolution)
O₂: 0–25 Vol.-% (0.1 Vol.-% resolution)
CO: 0–2,000 ppm (1 ppm resolution)
H₂S: 0–200 ppm (0.1 ppm resolution)

Certifications and Standards

ATEX: I M1 Ex da ia I Ma / II 1G Ex da ia IIC T4 Ga
IECEx: Ex da ia I Ma / Ex da ia IIC T4 Ga
CSA (Canada/USA): Class I, Zone 0, AEx da ia IIC T4 Ga / Class I Div. 1 Grps A-D
CE Mark: Conformity to EU Directives (ATEX, EMC, RED, RoHS)

Manufacturer Warranty:

4 years: Device and housing
5 years: XXS CO, H₂S, and O₂ sensors
3 years: CatEx SR sensor
2 years: Power supply (battery)